Embossed stainless steel sheet
Detailed description:
Embossing is a metal forming process for producing raised or sunken designs or relief in sheet material by means of matched male and female roller dies, theoretically with no change in metal thickness.
The illustration shows the metal sheet entering the roller, and then the embossed sheet leaving toward the drawing rollers.
Product information
Grade |
SUS430, SUS201, SUS304, SUS316. |
Type |
Sheet Only |
Thickness |
0.2 - 3.0mm |
Width |
1000/1219/1500mm |
Length |
Max.6000mm |
Coating |
Double PE / Laser PE Coating |
Remarks
|
• Pattern and dimensions can be customized. |
Color |
Ti-Gold, Ti-Nicket Silver, Ti-Rose Gold, Ti-Bronze, |
The product process
A. GRINDING
Grinding finished, also called brushed, direction or satin finished coil or sheet.
B. POLISHED
Polished stainless steel sheet used grinding fluid to polish by polishing
equipment on stainless steel sheet
C. PVD COLOR COATING
PVD means physical vapor deposition, working in vacuum condition.
D. ETCHING
Etching is corrode different kinds of patterns on stainless steel surfaces by
chemical methods.
E. EMBOSSING
It is physical rolling on the stainless steel surface, pattern comes from metal
Rolled.
Packing
Waterproof wrapping and wood board encase all the pack of the sheets, with metal edge protection for all top edges. The strap aligned from bottom bearer to the top, with edge protection on all top corners that meets the sheets
Wooden Pallets or customized Pallets are acceptable
Metal Pallets or customized Pallets are acceptable
If you're looking for the 201/304/316/430 embossed stainless steel sheet/plate, welcome to contact our factory. As one of the leading manufacturers and suppliers in China, we will offer you the competitive price and service.